xiegu X108G HF CB radio transceiver 0.5–30mhz 20W ham radio walkie talkie
X108G outdoor version is an X108 upgraded version. It is a single-conversion HF transceiver. In particular to optimize the receive channel , it has a lower local noise and higher signal to noise ratio, up 0.25uV & 12dB; the machine comes standard with a 2.3k SSB and CW filter 500Hz narrow-band filter, the filter excellent properties that dramatically improves the overall performance. The machine has a large dynamic range AGC control, so X108G when receiving various signals appear at ease; in addition, also has S meter, power meter standing, NB capabilities, to meet the daily needs of the operator. RF transmit channels using MOS pipe imports, the machine circuit to ensure the machine is kept constant RF output power level in each frequency band, but also according to actual needs, adjust the output power, and with a high VSWR protection. Overall performance indicators to meet the national standard, FCC (or CE) certification requirements. X108G outdoor version equipped with a color OLED solid state LCD screen, which allows you to clear outdoor viewing content displayed on the screen when you use; around all-aluminum handle configurations, to better protect the machine.
Low noise, single-conversion superheterodyne receiver.
Double-balanced diode mixers provide excellent dynamic range
Receiving sensitivity: 0.25uV (preamplifier open,> 1.8MHz band).
Narrow double-tuned band-pass filter covering the realization of all amateur bands (WARC bands).
Built NC circuit, the transmission power constant, high control accuracy.
Standard 0.5ppm TCXO circuit of high-quality clock source.
Narrowband standard 500Hz CW filter.
Machine design parameters
Frequency Range: Receive: 0.5 ~ 30MHz
Emissions: All HAM bands
Work mode: SSB (J3E)
The minimum frequency step: 1Hz
Antenna Impedance: 50
Operating temperature range: -10 ~ + 60
Frequency stability: ± 0.5ppm @ boot 5 minutes, -10 ~ + 60
Operating voltage: 12 ~ 14.5V DC
Current parameters: reception 600mAMax
Machine size: 120 * 45 * 180 (mm) [not including knobs, handles, and other prominent]
Transmit power: 20W (@ 13.8V)
Mode: SSB balanced modulator
AM modulated low
Spurious rejection: ≥40dBc
Carrier suppression: ≥45dBc
Selective: SSB 2.4kHz (-6dB)
CW 500Hz (-6dB)
IF frequency: 10.7MHz
Receiving sensitivity: 0.5uV (PRE ON, ≤2.0MHz)
0.3uV (PRE ON,> 2.0MHz)
1.8 ~ 2.0MHz
3.5 ~ 4.0MHz
5.0 ~ 5.5MHz
7.0 ~ 7.3MHz
10.0 ~ 10.2MHz
14.0 ~ 14.5MHz
18.0 ~ 18.2MHz
21.0 ~ 21.6MHz
24.8 ~ 25.0MHz
28.0 ~ 28.8MHz
0.5 ~ 30.0MHz (*)
Dynamic range: better than 90dB
RIT frequency tuning range: ± 1kHz
Audio output: 0.5W@8 ohm
Upgrade version ! Host +Handle +2.3khz filter +500Hz CW filter +0.5ppm TCXO
Included in the package are the radio, hand PTT Mic with keypad, DC connector, USB Cable
After sales service policy 1. Warranty clause: When buyer from the point of sale who has obtained the authorization of XIEGU to buy our products, within two weeks after purchase, if host, multifunctional microphone, shell structure of the host, the USB data lines, power lines appear the performance fault of non-human damage, the buyer can be in the original place of purchase to enjoy a free replacement service. The transport costs borne by the seller. When buyer from the point of sale who has obtained the authorization of XIEGU to buy our products, in more than two weeks and within a year, if host, multifunctional microphone, shell structure of the host, the USB data lines, power lines appear the performance fault of non-human damage, the buyer have the right to enjoy free repair service. The transportation cost of the product from the buyer to the original place of purchase is to be borne by the buyer. When buyer from the point of sale who has obtained the authorization of XIEGU to buy our products, beyond one year later, if host, multifunctional microphone, shell structure of the host, the USB data lines, power lines appear the performance fault of non-human damage, the buyer can apply for maintenance services in the original place of purchase. The maintenance cost and the transportation cost will be borne by the buyer. The warranty period is calculated from the date of the purchase of the product. 2. Warranty limitation clause: The following restrictions on the warranty services, applicable to the host and all accessories Meet one of the following circumstances, we will cancel the warranty: A. Without permission and authorization, modification, removal, maintenance of the host’s chip; B. Change product’s embedded software; C. Immersed in liquid, broken, or man-made external damage; D. Over the warranty period (including additional warranty period); E. Product’s serial number, after sales service card serial number does not correspond, missing, is torn or blurred; F. Products belong to seller who did not obtain the authorization of XIEGU. Meet one of the following conditions, it does not belong to the scope of the warranty: A. Damage caused by improper use of the user ; B. The damage caused by an accident ; C. Damage due to incorrect testing, maintenance, debugging, or other changes ; D. The damage is not caused by the material or the quality of production ; E. Due to improper use, causing damage to the shell or other external components ; F. Use incorrect connection or match Kit.
0 out of 5 (0 Ratings)
5 Stars (0)
4 Stars (0)
3 Stars (0)
2 Stars (0)
1 Star (0)
|Shipping Company||Shipping Cost||Estimated Delivery Time|
|3 - 7 days|
|3 - 7 days|
|5 - 14 days|
|Post Air Mail||Free Shipping||15 - 45 days|
|Return Policy||If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.
N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
|Seller Service||On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).|
Most Popular from Category
2016-07 i-com A2 wifi hardware with x201T Touch screen laptop installed ISTA-D ISTA-P Win8.1 system software expert mode
DH-mini298+ LCD Video Support TV Play Projector Portable Manual Focus Proyector Home Theater Build-in 2W Speaker Beamer
ATV12HU15M2 VFD Inverter Input 1ph 220V 7.5A 1.5KW New
high resolution 5760X1440dpi eco solvent printer with supplying ink CISS
Latest High Precision Reprap Prusa i3 A Pro 3D Printer DIY Kit Main Board,Power Supply, LCD Display In One Box
$ 898.99 / piece
Full brass housing 5000000mw 500W focusable 450nm burning match/paper/dry wood/candle/black+Glasses+Charger+box
online shopping, buying directly from manufacturers?
- Go to Alibaba.com and enter the wanted item into search field.
- Having made your choice, click "Contact supplier" button on the right
- On the next page enter your request and click "Send" button.
- Upon clicking you will be asked to get registered. Do it and wait for the reply.